This setting will ensure that the mobile will connect to the network when Mobile IP is supported in the network. If the modem is in an area that does not support MIP, it will drop the session.
From BlueVue Device Manager (Safest way)
Select the Configuration Tab
Select the General tab
Under Initialization String, enter the following string:
AT$QCMIP=2 (not case sensitive)
Telnet into modem through IP then enter the following sequence of AT commands:
- *reset modem*
It is the customer's responsibility to review the advice provided herein and its applicability to the system. Red Lion makes no representation about specific knowledge of the customer's system or the specific performance of the system. Red Lion is not responsible for any damage to equipment or connected systems. The use of this document is at your own risk. Red Lion standard product warranty applies.
Red Lion Technical Support
If you have any questions or trouble contact Red Lion Technical Support by clicking here or calling 1-877-432-9908.
For more information: http://www.redlion.net/support/policies-statements/warranty-statement