This document describes setting up a connection that allows two Redlion devices to communicate via OPC UA
FlexEdge and CR3000 or Graphite HMI
Establishing Communication between two Redlion devices with one device set up as an OPC UA Client and the other set up as an OPC UA Server.
Crimson 3.1 and Crimson 3.2
There are three different methods to get two redlion devices to communicate. They are Modbus TCP/IP, OPC Proxy TCP/IP Master and OPC UA. This tech note will talk about how to use OPC UA to get two redlion devices to communicate.
OPC UA Setup:
In this example, we are using Graphite G12 HMI (Crimson 3.1) as an OPC UA Client and a FlexEdge DA50A(Crimson 3.2) running as an OPC UA server.
Make sure you connect the two Redlion devices and your PC to the same Ethernet switch
Below are the settings that’s needed in Crimson 3.2 for the FlexEdge DA50A running as an OPC UA Server
Download the database with the settings above to the FlexEdge DA50A unit.
Below are the settings for the G12 HMI which is running as OPC UA Client
Go to Protocol 1 and pick OPC UA Client driver
Enter the IP Address of the FlexEdge DA50A device (OPC UA server) in the host name section as seen below
Now, download this database to the G12 HMI unit by doing a link -> update or send.
Once the database is successfully downloaded, click on download data model from device in the Crimson 3.1 database as seen below
You will be asked to save under a name. I am calling it as “OPCServerTags”.
Once you hit save, the software is going to pull up all the tags from the DA50A unit (OPC UA Server).
Go to the data tags section in the Crimson 3.1 database, create a new tag and map to any of the OPCUAServer tags.
Once you have finished creating tags and mapped them to OPC UA server tags, you can download the database by doing a link -> update or send following which G12 HMI should be able to read from or write to DA50A unit via OPC UA successfully.
Attached are the two Crimson databases referenced in this tech note
It is the customer's responsibility to review the advice provided herein and its applicability to the system. Red Lion makes no representation about specific knowledge of the customer's system or the specific performance of the system. Red Lion is not responsible for any damage to equipment or connected systems. The use of this document is at your own risk. Red Lion standard product warranty applies.
Red Lion Technical Support
If you have any questions or trouble contact Red Lion Technical Support by clicking here or calling 1-877-432-9908.
For more information: http://www.redlion.net/support/policies-statements/warranty-statement